ABS CNC Machining
Services On Aria
With excellent impact resistance and durability, CNC machined ABS parts provide high performance at a competitive cost.
Upload 3D CAD File to Start A New CNC Machining Quote
What is ABS CNC Machining?
ABS (Acrylonitrile Butadiene Styrene) is a widely used thermoplastic polymer known for its excellent impact resistance, toughness, and machinability. It is a lightweight, cost-effective engineering plastic commonly used in CNC machining for functional prototypes and end-use parts.
Application Of ABS CNC Machining
High Precision
ABS CNC Machining with ultra-precise tolerances (±0.005″ or better) for perfect fit and function.
Fast Turnaround
No need for expensive molds (unlike injection molding).
Superior Finish
Smoother than 3D printing, ready for painting/coating.
Material Versatility
Available in standard, flame-retardant, and glass-filled grades.
Machined ABS Mechanical Properties
Subtypes
Tensile Strength, Yield (MPa)
Fatigue Strength (MPa)
Impact Strength
Elongation at Break (%)
Heat Deflection
Hardness (Brinell)
Density (g/cm³)
ABS
30 - 48
17
411 J/m
5 - 50%
94 °C
80 - 114
1.04
ABS Flame Retardant
30 - 60
17
214 J/m
5 - 50%
88 °C
80 - 114
1.18
ABS CNC Machining Parameter
Parameter
Recommended Range
Notes
Spindle Speed (RPM)
10,000 - 20,000
Higher speeds for fine finishes, lower for roughing
Spindle Power (kW)
3 – 15
Depends on tool size and material removal rate
Feed Rate (mm/min)
500 – 3,000
Adjust based on tool diameter and depth of cut
Cutting Depth (mm)
0.5 – 5
Deeper cuts for roughing, shallow for finishing
Cutting Width (mm)
0.5 – 10 (50% stepover)
Full-width cuts possible for small tools
Machining Accuracy
±0.01 - ±0.05 mm
Tighter tolerances achievable with fine-tuning
Surface Roughness (Ra)
0.8 – 3.2 µm
Finer finishes with high RPM & low feed
Tool Type
2-4 Flute Carbide End Mills
Sharp, polished flutes reduce melting
Tool Diameter (mm)
1 – 12
Smaller tools for detail, larger for roughing
Coolant Type
Air Blast / Dry Machining
Minimal coolant needed (ABS is soft)
Chip Load (mm/tooth)
0.05 – 0.2
Prevents overheating and gumming
Ramp Angle (°)
3 – 10
Gradual entry reduces tool stress
Stepover
30% - 70%
Lower for finishing, higher for roughing
Custom parts for your aerospace projects now
All information and uploads are secure and confidential.
Related Post
Everything you need to know about surface roughness
If you’ve ever run your finger across a machined part and noticed how smooth—or not—it felt, you’ve already encountered surface roughness. It’s basically how much
The Essential Guide to Bead Blasting Finishing
Surface finishing is a manufacturing process where the surface of a product is altered to achieve certain qualities. Surface finishing is done to enhance the
Anodizing vs. Electroplating： Their Key Difference
Surface finishing enhances metal parts by improving corrosion resistance, wear resistance, and aesthetics in industries like aerospace, automotive, and electronics. Anodizing and electroplating, two widely